- 0.2 % proof strength Rp0.2
- ≥ 130MPaTrade sources only≤ 40 mm
- Tensile strength Rm
- 200–270MPaTrade sources only12.5–40 mm
All values
- Identity and composition not yet
- Mechanical 3
- Design values not yet
- Physical not yet
- Thermal not yet
- Fire not yet
- Chemical and durability not yet
Mechanical
Strength
0.2 % proof strength Rp0.2
Minimum 0.2 % proof strength guaranteed by the product standard.
| Condition | Value | Evidence |
|---|---|---|
| ≥ 130MPa | Trade sources only |
Tensile strength Rm
Ultimate tensile strength. Product standards give a range or a minimum.
| Condition | Value | Evidence |
|---|---|---|
| 220–270MPa | Trade sources only | |
| 200–270MPa | Trade sources only |
Not yet verified for this grade
- Eurocode 9 Table 3.2a row for H12/H22/H32 (unreadable in the copy found)
- A rolling mill's datasheet
Missing on purpose: a value appears here only once a public source states it.
Sources here are public pages that reproduce EN 485-2. For design and acceptance, the standard edition named in your specification and the inspection certificate (EN 10204 3.1) of the delivered product take precedence. Design factors are recommended values; your National Annex may set others.