Standards
EN 10025-2:2019EN 10025-2:2019EN 10025-2:2019
EN 10025-2:2019
Hot rolled products of structural steels — Part 2: Non-alloy structural steels
The European product standard for S235, S275, S355 and S450 plate, strip, sections and bars. Defines minimum yield and tensile range by thickness, impact qualities (JR, J0, J2, K2) and ladle analysis.
Published nationally as BS EN, DIN EN, HRN EN, NF EN… with identical technical content.
47 values on this site name a clause of this document.
Grades on Matipedia
EN 10025-2:2019S235
Mild structural steel: 235 MPa minimum yield up to 16 mm, 360–510 MPa tensile.
- ReH
- ≥ 235 MPa
- Rm
- 360–510 MPa
- Confirmed
- 4
- Corroborated
- 1
- Single source
- 7
EN 10025-2:2019S275
Structural steel with 275 MPa minimum yield up to 16 mm, 410–560 MPa tensile.
- ReH
- ≥ 275 MPa
- Rm
- 410–560 MPa
- Confirmed
- 5
- Corroborated
- 3
- Single source
- 4
- Disagreements explained
- 2
EN 10025-2:2019S355
Europe's workhorse structural steel: 355 MPa minimum yield up to 16 mm, 470–630 MPa tensile from 3 to 100 mm.
- ReH
- ≥ 355 MPa
- Rm
- 470–630 MPa
- Confirmed
- 26
- Corroborated
- 10
- Single source
- 7
- Disagreements explained
- 8